Coating Thickness Meter MEGA-CHECK Profi You can connect many specialized probes to the List-Magnetik MEGA-CHECK, Basic, Profi or Master coating thickness gauges. Applications with particularly small openings, thick layers and small measuring points are thus easily possible. Special functions such as the scan measurement for rough surfaces, and the duplex measurement for galvanized, and additionally coated steel complete the performance spectrum. The signals are already digitized in the probe for an absolutely interference-free and precise measurement. This results in very accurate, reproducible measurements. At List-Magnetik, you will find a wide range of probes for FE metals (ferrous metals) and NFE metals (non-ferrous metals such as aluminum, brass, copper, bronze and non-magnetic stainless steel) as well as combined probes with automatic recognition of the base material. The combined probe with swivel-mounted head is unique worldwide. The magnet-inductive method allows measurements of paints, varnishes, plastics, zinc and galvanic coatings on steel. With the eddy current method, you measure insulating layers (color, varnish, plastic, anodic) on non-ferrous metals. All devices have a large and clear graphic display. The menu is given in German, English, Spanish or Dutch. The probe cable, which can be plugged in on both sides, connects the display unit and the probe and can be easily replaced in the event of a cable break. All List-Magnetik MEGA-CHECK coating thickness meters are high-quality products "Made in Germany". MEGA-CHECK Profi provides as an additional service to MEGA-CHECK Basic a data logger and a RS232 interface. The measured values can be statistically evaluated. The documentation of the measurement results with easy operation, is carried out via a connected PC or printer. Three calibration memories are available to store special calibration parts.
|
|
Technical data:
|
|
Applications:
|
Depending on the selection of the probe |
Standards:
|
ISO 2178, ISO 2360, BS 5411, ASTM |
Measuring probe:
|
The measuring range is depending on the probe, |
Accuracy:
|
unter 100 µm ± 1 µm, 100-1000 µm: ± 1 %, 1000-2000 µm: ± 3 %, > 2000 µm: ± 5 % |
Resolution:
|
1-100 µm: 0.1 µm, 100-1000 µm: 1 µm, > 1000 µm: 10 µm |
Measuring units:
|
µm and mils |
Environment temperature:
|
0 - 50° C |
Display:
|
Graphic display |
Multilingual menu navigation:
|
German / English / Spanish / Dutch |
Data logger:
|
10,000 measurements |
Statistics:
|
Count / Maximum / Minimum / Average / Standard deviation |
Calibration memory:
|
3 calibration memories for storing individual calibrations |
Interface:
|
RS232 interface with USB cable for communication with PC and printer |
Power supply:
|
3x 1.5 V AA Mignon |
Operating time:
|
approx. 60 hours |
Dimensions:
|
198 x 92 x 35 mm |
Weight:
|
265 g (with batteries) |
Warranty:
|
12 months |
Customs tariff no.:
|
9031 8020 |
Applicable measuring probes:
Recommended Optionals:
|
Scope of supply:
MEGA-CHECK Profi, without probe, with probe cable, USB cable, calibration base plates FE + NFE, 2 calibration foils and case, including calibration certificate. The probe must be ordered separately.
Magnetic inductive probe for MEGA-CHECK Basic / Profi / Master for coating thickness measurement on iron and steel base up to 5 mm. The probe head can be swiveled 90°.
Calibration foil set with manufacturer's certificate for checking the calibration of coating thickness meters. The calibration foil set is supplied with 4 calibration foils in the range of 30-300 ?m and a ceramic calibration plate of 1000 ?m. The certificate is traceable to Physikalisch-Technische Bundesanstalt (PTB) Braunschweig.
Bar-shaped magnetic inductive probe for MEGA-CHECK Basic / Profi / Master for coating thickness measurement inside of very small spaces or pipes, on iron and steel base, up to 2 mm. The measurement is performed at right angles to the probe.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK Basic / Profi / Master / Pocket, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm.
Combined, working both with magnetic induction principle and eddy current technology for MEGA-CHECK Basic / Profi / Master, for coating thickness measurement on all metal bases, on iron and steel up to 5 mm, otherwise up to 2 mm. The probe head can be swiveled 90°.
With this USB interface cable, you can connect the coating thickness meters MEGA-CHECK Profi and MEGA-CHECK Master as well as the magnetic field meter MP-2000 to a PC. Since the end of 2016, it has been supplied as standard with these devices.
This Product was added to our catalogue on 13/03/2009.